Birch & Waite Food Manufacturing Facility

Project name: Birch & Waite Food Manufacturing Facility, Villawood, NSW

Client / Builder: Connected Workplaces 

Mechanical Contractor: PSB Air Conditioning 

Project Value: $5,000,000 

Sector: Food Processing / Light Industrial 

Mechanical Consultant: Kuttner Collins

Project Overview

PSB Air Conditioning is delivering the mechanical services, steam and condensate, and compressed air packages for Birch & Waite’s new food manufacturing facility at Villawood in Sydney’s south-west. The project forms part of PSB Air’s experience in delivering mechanical services for new buildings, with the additional requirements of a food processing environment. 

The facility is a purpose-built food production plant combining temperature-controlled production and packing areas, wash-down zones, cold and chilled storage, and supporting office, amenities and plant spaces.

The project is unusual for a mechanical contractor in that it covers three separate services packages under a single subcontract – mechanical and air conditioning, steam and condensate, and compressed air – all three delivered on a design and construct basis. Each one serves the production process itself, not just the building, which means the mechanical installation is directly tied to the client’s manufacturing output.

Scope of Works

Mechanical & Air Conditioning — Design & Construct

  • Air handling units with 316 stainless steel internal construction throughout the airflow path, including fan walls
  • Installation, pipework connection, controls integration and commissioning of the facility’s central air-cooled chiller plant, including seismic-rated spring isolation
  • Chilled water reticulation serving production, packing and storage areas
  • Fan coil units with 316 stainless steel internals serving production and packing areas
  • Ductwork, insulation and air distribution to production, storage and amenity spaces
  • Roof-mounted ventilators and general factory ventilation
  • Installation of process extract hoods
  • Outside air, toilet, amenities and plant room ventilation
  • Mechanical switchboards, power and controls
  • Full design, supply, installation and commissioning of the facility’s Building Management and Control System, developed from the client’s project performance requirements
  • Control strategies, head-end graphics and integration of refrigeration plant controls
  • Seismic restraint of mechanical plant in accordance with AS 1170.4
  • Testing, air and water balancing, commissioning and certification

Steam & Condensate — Design & Construct

  • Complete balance of plant to the steam boiler installation
  • Feedwater tank and blowdown vessel
  • Water softening and ion exchange treatment plant
  • Chemical dosing system
  • Stainless steel 316 flues
  • Boiler control panels
  • Steam and condensate reticulation throughout the production facility
  • Spirax Sarco valve, trap and control stations across the full field reticulation
  • Insulation with stainless steel cladding through factory areas
  • Pressure testing, commissioning and certification

Compressed Air — Design & Construct

  • Compressed air reticulation to production plant and equipment
  • Fusion-welded polyethylene pipework system
  • Drop legs, isolation and take-off points to process equipment
  • Pressure testing, commissioning and certification

Three Services, One Package

The defining feature of this project is the breadth of the mechanical scope.

Most food manufacturing facilities are procured with air conditioning, steam and compressed air as three separate trade packages, each with its own contractor, its own design interface and its own commissioning programme. On this project all three sit with PSB, and all three carry full design and construct responsibility.

That structure removes the interface risk that usually sits between process utilities and building services. Plant room layouts, penetrations, structural loads, electrical supplies and controls are designed and coordinated once, by one contractor, rather than negotiated between three.

It also means a single point of accountability for the utilities that keep the production line running. Steam, compressed air and process cooling are not comfort systems on a site like this – they are part of the manufacturing process, and an interruption to any of them stops production.

Food-Grade and Hygienic Construction

Material selection and construction detail throughout the facility are driven by food safety requirements rather than conventional commercial practice.

Air handling units and fan coil units serving production areas are constructed with 316 stainless steel internals across all airflow-path surfaces, so that equipment can withstand repeated wash-down and cleaning chemicals without degradation or corrosion into the airstream.

Insulated steam and condensate pipework through factory areas is finished in stainless steel cladding, providing a cleanable, non-shedding surface in spaces subject to wash-down.

Filtration, air distribution and ventilation design are all coordinated to support the facility’s hygiene zoning, with attention to air movement between production, packing and storage areas.

Project Highlights

  • $5 million food processing and light industrial mechanical package
  • Three services packages – air conditioning, steam and condensate, compressed air –  under one subcontract
  • Full design and construct responsibility across all three packages
  • Central air-cooled chiller plant installed, commissioned and integrated by PSB
  • Complete steam balance of plant, including water treatment, dosing, blowdown and flues
  • 316 stainless steel air handling and fan coil construction for food-grade wash-down environments
  • Stainless steel clad steam and condensate reticulation through factory areas
  • Fusion-welded compressed air reticulation to production equipment
  • Complete BMCS designed from the client’s performance brief, including refrigeration plant controls integration
  • Seismic restraint design to AS 1170.4
  • Full testing, balancing, commissioning and certification across all three packages

Challenges

Design responsibility across three disciplines. Carrying design and construct liability for air conditioning, steam and compressed air within a single subcontract means managing three separate design processes, three sets of technical submissions and three approval paths – each with its own standards, its own specialist input and its own commissioning requirements.

Coordination with process equipment. The production plant layout drives the services, not the other way around. Connection points, capacities, control interfaces and routing all had to be designed around process equipment that continued to develop through the design period.

Congested plant areas. Bringing chilled water, steam, condensate and compressed air services into the same plant rooms and the same ceiling and roof spaces demands detailed coordination – with each other, with the process equipment, and with the structural, electrical and hydraulic trades.

Food-grade requirements throughout. Stainless steel construction, cleanable finishes and hygienic detailing apply across the full installation, not just at the point of production. That affects procurement lead times, fabrication methods and site installation practice from day one.

Delivery

The Birch & Waite facility demonstrates PSB Air’s experience delivering industrial HVAC systems and process utilities alongside conventional building services in a demanding food manufacturing environment.  

Working with Connected Workplaces, PSB is delivering a fully integrated design and construct package covering air conditioning, ventilation, steam and condensate, and compressed air – carrying design responsibility for all three systems along with testing, commissioning and certification.

The project reflects PSB Air’s continued growth in the industrial and food processing sector, and our ability to take on technically complex, multi-discipline mechanical scopes that go well beyond comfort air conditioning.

Related Project: BlueScope Steel Main Control Building

Explore PSB Air’s mechanical services work for another industrial facility, including central plant systems and associated HVAC infrastructure.

Frequently Asked Questions

Why is 316 stainless steel used in air handling equipment for food manufacturing facilities?

Food production environments often require equipment that can withstand frequent cleaning and exposure to wash-down chemicals. At Birch & Waite, PSB Air is installing air handling units and fan coil units with 316 stainless steel internals to provide corrosion resistance and cleanable surfaces within the airflow path.

Combining these services under one contractor reduces the number of design interfaces the builder needs to manage. At Birch & Waite, PSB Air coordinates plant layouts, service routes and equipment connections across all three packages, with one contractor responsible for their design, installation and commissioning.

Production equipment determines where process utilities need to connect and the capacities required. For Birch & Waite, PSB Air’s design must accommodate developing equipment layouts while coordinating chilled water, steam, condensate and compressed air routes with structural, electrical and hydraulic services.

Integration involves connecting the chiller plant’s controls to the facility’s wider management system so its operation can be monitored and coordinated with other equipment. At Birch & Waite, PSB Air is delivering the BMCS from the client’s performance requirements, including controls integration for the refrigeration plant.

Commissioning requires the steam and condensate installation to be tested and checked against its design requirements. At Birch & Waite, the scope includes the boiler balance of plant, water treatment, chemical dosing, steam and condensate reticulation, valve and trap stations, pressure testing and commissioning.

Nice! We got your message and will get in touch soon to talk about your project!

Fill up the info below and we’ll get in touch real fast!